Top Navigation

Archive | Hydraulic Hoses

How to Replace Steel Brake Lines : Remounting Rear Axle Brake Hoses


Mounting a rear axle brake hose. Learn how to replace a truck’s steel brake lines, brake line removal, and custom brake lines in this free car maintenance video.

Expert: Nathan McCullough
Bio: Nathan McCullough graduated from Nashville Auto-Diesel College with a GPA of 3.5 and received their Craftsmanship Award and Honor Seal.
Filmmaker: Robert Rogers


Replacing Ford Escape Brake Hoses – Mazda Tribute Brake Hoses Replace


In this vid we outline a common issue involving flexible rubber brake hoses on Ford Escape and Mazda Tribute vehicles. I’ll show you the point of failure and the process of replacing so that you can save money and maintain the safety of you, your family and others sharing the road. Thanks for watching and please subscribe to The Car Doctor channel for more money saving repair vids!


RC ADVENTURES – Toxic Waste Recovery – 1/12 Scale 4200 XL Excavator & 8×8 Tipper Truck


Click Here To Subscribe! ► – (Part 2) The Snow is Deep.. and the RC Imagination is running wild! I have been waiting to do this video for almost 6 months.. and finally I was able to do it! Don’t worry! There was NO ACTUAL TOXiC WASTE! It is all a stage, and no environmental hazards were actually present at the time of this filming. We here at the RCSparks Studio take these types of situations very seriously when we are filming on location, and with such dangerous toxic chemicals. HAZMAT was standing by.

This video features the RC4WD 1/12 Scale Earth Digger 4200XL, and the 1/14 8×8 Armageddon Hydraulic Dump Truck. Both are fantastic machines. I have a lot of fun with them 🙂 I hope you enjoy these adventures. There is no limits to an imagination when you can use an RC!

I do have some upgrades done to the 1/12 Scale Earth Digger 4200XL Excavator. The Bucket is the Siberia Super Duty Bucket: as well I installed the Earth Digger Excavator Brushless Track Upgrade: Kit

The Speed difference in the brushless system is AMAZiNG! Its twice as fast as before. The Upgrade included a new gear set, and motor. The Entire Drive Cog is also included and a rotational brushless connection for the turret. I am very pleased with the upgrade.. and I look forward to warmer days! The hydraulics run slowly in the cold weather. This is due to the Hydraulic fluid being thicker in the cold air. Thus, the Hydraulic pump has to work hard to keep the excavator arm going.

I run the excavator on a GensAce 8500mah 3s Lipo – High Output. The Run time is approximately 1/2 Hour.

You can find Radio Control Construction equipment like the ones in this video at:

Here is some information on the Stock Excavator (Before Upgrades):


100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs

RC ADVENTURES™/ RCSparks Studio™ © 2014 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever – including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without prior the written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown – Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.


Hydraulic & Industrial HosesBy Atal Hose & Engg Works Pvt Ltd., Bahadurgarh


Welcome to Atal Hose and Engineer Works Private Limited, Manufacturer & Exporter of Hydraulic and Industrial Hoses. The company was incepted in 1993 at Bahadurgarh. Our products are applicable in Automation, Chemical, Textile and other industries. Bhumi Info Presetch and Patel Engineers are some of our elite clients and we are backed by Abrasion & corrosion resistance. We offer a vast range of Industrial, Braided and Teflon Hoses. Our Industrial, Braided and Teflon Hoses are best in the industry amongst others. We offer Industrial Hose Crimping Machine and Wrap Finish Air Hoses that are widely acclaimed in the market. Roll Marking, Hose Testing and Skiving Machines offered by us are acknowledged for their functionality. Our Flexible Metal Accessories and Roll Marking Machines for Electrical Industries are a class apart. We also provide Teflon and Braided Hoses for Automobile Industries that are extremely reliable. For More Information, Log On At


RG Group’s Parker Hannifin Store Business Model


Our brand business model provides a local presence in our key geographical markets. The RG Groups Parker Store network offers walk-in customers prompt, efficient, and professional in-store services while you wait. Every branch is committed to providing real time knowledge technological support in friendly and comfortable shopping environments. Our local branches offer an intense inventory of Fluid Power System replacement parts and solutions.

It’s not just any inventory it’s the right inventory.

We pride ourselves in having what you want when you want it. Our local customer’s rely on our knowledgeable branch managers to provide custom made hydraulic and pneumatic hose assemblies and complementary products to keep their business moving. Our branch managers are factory trained experts who speak your language. We don’t just replace a hose, our goal is to isolate and eliminate future problems as well. To meet today’s hyper-pace of business our branches off 24/7 emergency services.

RG Group headquarters is located in York, PA but we have stores all around Pennsylvania, New Jersey, and New York. We do everything from shipping out basic assembly parts to creating custom engineered solutions for our customers. Our job is to keep your business in motion.

RG Group
650 North State Street
York, PA 17403
(717) 846-9300


Powered by WordPress. Designed by Woo Themes